PRINTER 3D PlayMaker XD 2

New

Playmaker XD, 3D Printer third generation, associated with a refined mechanics advanced electronics allow the realization of functional models and prototypes with high dimensional accuracy to be applied in professional and industrial applications.

More details

Add to wishlist

More info

Playmaker XD, 3D Printer third generation, associated with a refined mechanics advanced electronics allow the realization of functional models and prototypes with high dimensional accuracy to be applied in professional and industrial applications.

Playmaker XD uses 3D printing technology FFF (Fused Filament Fabrication) and is designed for reliability, accuracy and accessibility to the user.

General characteristics
layer resolution 20-300 microns

Playmaker XD achieves an accuracy equal to 20 micron layer nozzle of 0.40 mm.

With special materials such as Ninjaflex it is able to reach an accuracy of 0.1 mm layer.

maximum Z-axis resolution 20 microns
Axis X Y step resolution 0.0125 mm

print size 360X290X360 mm

Playmaker XD is equipped with a hot chamber at a controlled temperature and a printing plate designed to measure that reaches a temperature of 110 ° C.

The maximum print size is 360x290x360 mm.
The print dimensions remain unchanged with the use of two extruders.

Cartesian motion X, Y lets achieve a print speed of up to 300 mm / s.

Print Plan
No need to align every time
The platen does not need to be calibrated before each print job. This characteristic is given by its structure, built not cantilevered with single screw but with four cemented and ground bars with four screws.
One pair for each vertex of the plan.
The structure of the printing plane and the optical end stroke allow to maintain a constant alignment in time.
The calibration can be performed automatically in any case by starting the "calibration of the printing table" function from the control panel.

Bowden Drive wire feed system with Ø 1.75 mm
Playmaker XD printers use the Bowden drive system with filaments with a diameter of 1.75 mm.
Despite the use of the bowden it is possible to print flexible materials such as rubber and the Ninjaflex without any problem.

The Playmaker XD mountain extruders E3D-v6 modified that reach a temperature of 260 ° C and allow the printing of numerous materials.
The extruder is composed of an aluminum heat sink and a brass nozzle.
The standard nozzle diameter is 0.40 mm.
On request it is possible to fit different diameters up to 1 mm.
These extruders allow easy nozzle removal in case you want to change diameter, or if you were to clean in case of clogging.
The replacement of the nozzle is a simple and fast process, takes place with the use of a hexagon wrench of 7 mm.

Extruders adjustment
The extruders mounted on the Playmaker XD printers are fixed and aligned with one another. If you print with a single extruder just record the second extruder upwards of about 3 mm.

To record the extruder we designed a mechanism that, through a screw placed on each extruder, can raise or lower with simple micro laps. The moment you will have to print using the second extruder will not need to perform the calibration, but simply record the extruder with the same micro spins made to lift it from the platen.

Change filament - Sensor end filament
To simplify installation and filament change we decided to make this automatic procedure. By activating the change-stranded command via the control panel, the printer pulls the filament present in the extruder and remains pending user-prepared the new strand and then load and start or resume printing.

The control panel positioned in the front of the printer is easy to read and allows rapid and immediate management of all print parameters (during printing) such as:

    Extrusion temperature and the platen
    The fan setting
    Automatic calibration of the printing table
    Flow
    Axis movement
    The filament extrusion control
    SD card management
    Automatic filament Change
    Pause / Stop Press

Filaments
Many print materials supported
Playmaker XD supports many types of filament on the market PLA and ABS, the special materials such Ninjaflex, TPU shore AD, hybrid PLA, PVA, HIPS, T-glase, PETG, Nylon, Laywood, PLA Flex, Laywoo-D3, carbon fiber, filaments loaded with bronze and copper, ASA X, X ABS, PC, ABS and related technical filaments.

The diameter of 1.75 mm is supported
Playmaker XD 1 - an extruder
Playmaker XD 2 - Two extruders

1 other products in the same category:

Download